Flow Measurement

Electromagnetic flow measurement

Electromagnetic

Universal measuring principle for all conductive liquids. Virtually independent of pressure, density, temperature and viscosity. Even liquids with solids can be measured, e.g. ore slurry or cellulose pulps. Over 2 million Endress+Hauser magmeters installed since 1977!

Sizes: DN 2 to 2400.

For more information Contact us at admin@prolecaustralia.com.au or call us on 02 4964 9660

Corolis

Coriolis

Universal measuring principle for liquids and gases. Multivariable sensors: simultaneous and direct measurement of mass flow, density, temperature and viscosity. Independent of the physical fluid properties.

Sizes: DN 1 to 400 (max. 4100 t/h)

For more information Contact us at admin@prolecaustralia.com.au or call us on 02 4964 9660

Ultrasonic

Ultrasonic

Volume flow measurement of clean liquids, regardless of electrical conductivity with either clamp-on or inline sensor type. Ultrasonic measurement enables cost-effective and economical flow metering anywhere in the process. Independent of pressure, temperature and the physical fluid properties. Special devices for measuring wet or dirty gases at low pressures, e.g. biogas or land fill gas.

Sizes: DN 15 to 4000.

For more information Contact us at admin@prolecaustralia.com.au or call us on 02 4964 9660

Thermal

Thermal

Direct mass flow measurement of gases with low process pressure up to 40 bar. Measuring principle with a high operable flow range (100:1) and an excellent low-end sensitivity. Negligible pressure loss.

Sizes: DN 15 to 1500.

For more information Contact us at admin@prolecaustralia.com.au or call us on 02 4964 9660

Differential

Differential pressure (DP)

Universally applicable for liquids, gases and steam up to 420 bar and 1000 °C. Robust primary element as it is completely mechanical with no moving parts. The transmitter can be replaced during operation, e.g. for maintenance or modernization of the measuring point without interrupting the process.

Sizes: DN 10 to 4000.

For more information Contact us at admin@prolecaustralia.com.au or call us on 02 4964 9660

Vortex

Vortex

Universally applicable for the measurement of liquids, gases and steam. Extremely robust with regard to external vibrations, dirt, water hammer and temperature shocks. Largely independent of changes in pressure, temperature and viscosity. High long-term stability, no zero point drift. Efficient steam plant operation thanks to the only wet steam detection of its kind in the world.

Sizes: DN 15 to 300.

For more information Contact us at admin@prolecaustralia.com.au or call us on 02 4964 9660

Be In The Know

 

Sign up to our monthly newsletter for the latest product info, exclusive deals and more


Prolec Australia

335 Tomago Rd,

Tomago NSW 2322

P : (02) 4964 9660